the fuel minder™ store
Your # 1 Source for remote fuel-level indicators and accessories!
Web-Based Monitoring and Alarm Notification
The ALL NEW Sensaphone Web600 provides flexible web-based remote monitoring at an affordable price. Keep track of critical temperatures and other conditions and be notified immediately when current values exceed the normal range. Completely standalone and easy to use, the Web600 can be used for monitoring cold food storage, medical cold storage, and other temperature sensitive areas like computer rooms and data centers. In addition to temperature monitoring, the Web600 can also read values from humidity sensors, air quality sensors, water leak detection sensors and much more.
FEATURES:
- E-Mail, Text Messages, SNMP Traps
- 8 Alarm escalation levels
- Comprehensive scheduling per input, profile, and alarm destination
- 6 universal inputs - Normally Cosed/ Normally Open Dry Contact, 2.8K/ 10K Thermistor, 4-20mA Current Loop
Sensor Inputs:
Connect up to six external sensors to monitor a variety of equipment and co
nditions. Each input zone can be connected to a temperature sensor, an analog transducer, or a dry contact switch.
Web Status:
Live status and history is only a webpage away. The Web600 built in web server provides quick and easy information about your monitored conditions. Even time stamped history reports are readily available online.
Alarm Notification:
When monitored conditions exceed normal values, the Web600 will notify you immediately be sending out e-mail alarm messages, and even text messages. Up to eight people can be contacted to make sure that proper action is taken.
Web Programming:
Built in web server for easy access to programming and status. Just point your browser to the Web600's webpage and fill in the blanks for a quick configuration.
SENSAPHONE WEB600 COMPLETE FUEL MONITORING SYSTEM
Now monitor fuel levels and temperature by phone with the complete Fuel Minder Store Sensaphone WEB600 Fuel Monitoring System (now that's a mouthful!)
System includes:
- Sensaphone WEB600
- 2.8k-ohmMagneto Resistive Fuel level Sensor
- all parts required for installation
The 2.8k-ohm output emulates a 2.8k-ohm thermistor and is compatible with controllers such as the Sensaphone-400 or Sensaphone Web-600, providing fuel level monitoring and control via phone (display shows 0-100% FUEL LEVEL).
(Standard vertical and horizontal tank sizes available--Contact Us for custom size tanks
An unbeatable system for anyone who desires phone monitoring and control capability!
SENSAPHONE WEB600 OPTIONAL SENSORS
The magnetic reed switch may be used with all Sensaphone models to detect any unauthorized entry or intrusion. They are usually installed on doors and windows to detect their opening and closing. Several magnetic reed switches may be wired in series.
The passive infra-red motion detector can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Its range of detection covers approximately forty feet of area. Multiple sensors can be wired in series to a single output.
The water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last for approximately 3-5 years. When the batteries start to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.